Back to Home

ATM Forum Message

Forums: Atm · Astrophotography · Blackholes · Blackholes2 · CCD · Celestron · Domes · Education
Eyepieces · Meade · Misc. · God and Science · SETI · Software · UFO · XEphem
RSS Button

Home | Discussion Forums | Amateur Telescope Making | Post
Login

Be the first pioneers to continue the Astronomy Discussions at our new Astronomy meeting place...
The Space and Astronomy Agora
PVC Tubes

Forum List | Follow Ups | Post Message | Back to Thread Topics
Posted by David Burton on October 21, 2002 13:45:18 UTC

This weekend I finished my first "real" telescope: a 3 inch f/10 reflector. I used a 4 inch PVC pipe for the tube. It isn't much of a scope, I admit, but I consider it "training" for the future. Previously I had made two 50mm finders out of PVC. Everything has turned out nicely (the finders are quite usable) and I'm beginning to think of something even more usable: probably a 6 inch f/8 reflector.

I had been intending to use sonotube for this next project mostly because that seems to be what everyone else does. But I started thinking about how comfortable I've gotten working with PVC. And that makes me wonder: Why do I never hear of anyone building "larger" telescopes out of it? Is it considered too heavy? too expensive? not stiff enough? Are lots of people using it and I just didn't know? It seems to work so well for the small scopes I've made. Is there some maximum size above which PVC is considered impractical?

Any help would be appreciated!

Follow Ups:

Login to Post
Additional Information
Google
 
Web www.astronomy.net
DayNightLine
About Astronomy Net | Advertise on Astronomy Net | Contact & Comments | Privacy Policy
Unless otherwise specified, web site content Copyright 1994-2024 John Huggins All Rights Reserved
Forum posts are Copyright their authors as specified in the heading above the post.
"dbHTML," "AstroGuide," "ASTRONOMY.NET" & "VA.NET"
are trademarks of John Huggins