Happy Halloween

ATM Forum Message

Forums: Atm · Astrophotography · Blackholes · Blackholes2 · CCD · Celestron · Domes · Education
Eyepieces · Meade · Misc. · God and Science · SETI · Software · UFO · XEphem
RSS Button

Home | Discussion Forums | Amateur Telescope Making | Post
Login

Be the first pioneers to continue the Astronomy Discussions at our new Astronomy meeting place...
The Space and Astronomy Agora
9 Point Cell

Forum List | Follow Ups | Post Message | Back to Thread Topics | In Response To
Posted by Robert May on February 16, 2006 03:11:53 UTC

You really don't need a 9 point cell for the mirror unless the last of the dobs used a much thinner piece of glass for the mirror.
A regular 3 point cell will work just fine and will be distorting the glass a lot less than the probable errors in the mirror surface are by a huge margin.
Unless you have had the mirror tested and found it to be within a `/30th of a wave and want to insure that you are still within a1/37th of a wave when the mirror is in the cell, anything more than 3 points is unneeded.
When you mount the mirror the wisdom today is to put the mounting points at about the 50% zone rather than the old 70% zone as this makes the mirror, when it deforms, a longer radius parabola rather than a different figure. Several guys put together a program called PLOP that does finite element anlysis on mirrors and they found out that the conventional wisdom of where to put the mounting points was wrong.
Sorry to be so late replying but I just got out of the hospital

Follow Ups:

Login to Post
Additional Information
Google
 
Web www.astronomy.net
DayNightLine
About Astronomy Net | Advertise on Astronomy Net | Contact & Comments | Privacy Policy
Unless otherwise specified, web site content Copyright 1994-2018 John Huggins All Rights Reserved
Forum posts are Copyright their authors as specified in the heading above the post.
"dbHTML," "AstroGuide," "ASTRONOMY.NET" & "VA.NET"
are trademarks of John Huggins