Back to Home

ATM Forum Message

Forums: Atm · Astrophotography · Blackholes · Blackholes2 · CCD · Celestron · Domes · Education
Eyepieces · Meade · Misc. · God and Science · SETI · Software · UFO · XEphem
RSS Button

Home | Discussion Forums | Amateur Telescope Making | Post
Login

Be the first pioneers to continue the Astronomy Discussions at our new Astronomy meeting place...
The Space and Astronomy Agora
Fixall

Forum List | Follow Ups | Post Message | Back to Thread Topics | In Response To
Posted by Rick Crockett on April 18, 2007 05:19:50 UTC

I believe Fixall is the industrial version of Dental Plaster. Abyway I have used it for years and it cost about one fourth as much. I bought 25 lbs of Fixall for less than eight bucks a couple years ago.

Fixall will set even under water and in less than 30 minutes in cool air. I just made a fancy radial counter weight out of lead in a mold made from Fixall. Granted, I did not allow it to cure or bake it so two hours was not enough as it went a little wild when I pour molten lead into it. Things worked out fine but little minature volcanos erupted spitting micro missiles of hot lead. Whew! but it worked out nicely and the exposed surface could be mistaken for Lunar Art. I knew better but just wanted to see how far I could push it. Fixall when cured will give a perfect finish to lead castings. As a tool it can be put into use within two hours of casting but two days would be better.
-Rick

Follow Ups:

    Login to Post
    Additional Information
    Google
     
    Web www.astronomy.net
    DayNightLine
    About Astronomy Net | Advertise on Astronomy Net | Contact & Comments | Privacy Policy
    Unless otherwise specified, web site content Copyright 1994-2024 John Huggins All Rights Reserved
    Forum posts are Copyright their authors as specified in the heading above the post.
    "dbHTML," "AstroGuide," "ASTRONOMY.NET" & "VA.NET"
    are trademarks of John Huggins