Back to Home

ATM Forum Message

Forums: Atm · Astrophotography · Blackholes · Blackholes2 · CCD · Celestron · Domes · Education
Eyepieces · Meade · Misc. · God and Science · SETI · Software · UFO · XEphem
RSS Button

Home | Discussion Forums | Amateur Telescope Making | Post

Be the first pioneers to continue the Astronomy Discussions at our new Astronomy meeting place...
The Space and Astronomy Agora
Re: Mirror Grinding

Forum List | Follow Ups | Post Message | Back to Thread Topics | In Response To
Posted by Robert May on May 15, 1998 16:20:31 UTC

: In my location, mirror blanks are very thin on the ground. I know a glass merchant who can cheaply cut disks from 10mm glass. My question is: Would it be OK to glue a number of these disks together to make up a required thickness provided a reliable adhesive was employed. Many people have tried and all have basically failed. One of the biggest problems is the expansion of the glass as the temperature changes destroying the figure of the reflective surface. May I recommend that you give Willmann-Bell a search on the NET. They are probably the best place to get astronomical books and also they have some nice kits and pyrex (better than glass) for reflectors. If you want to get into refractors, Newport Glass Works (Newport, Ca.) has some nice refractor kits. If you want to do a mirror with the glass that you have, I would suggest that you do a small mirror first and then try to get through the problems of doing a very thin mirror with the next project. Use the first mirror as a guider/finder for the main scope. Have Fun and Keep Looking Up! Bob May

Follow Ups:

Login to Post
Additional Information
About Astronomy Net | Advertise on Astronomy Net | Contact & Comments | Privacy Policy
Unless otherwise specified, web site content Copyright 1994-2024 John Huggins All Rights Reserved
Forum posts are Copyright their authors as specified in the heading above the post.
"dbHTML," "AstroGuide," "ASTRONOMY.NET" & "VA.NET"
are trademarks of John Huggins