Back to Home

ATM Forum Message

Forums: Atm · Astrophotography · Blackholes · Blackholes2 · CCD · Celestron · Domes · Education
Eyepieces · Meade · Misc. · God and Science · SETI · Software · UFO · XEphem
RSS Button

Home | Discussion Forums | Amateur Telescope Making | Post
Login

Be the first pioneers to continue the Astronomy Discussions at our new Astronomy meeting place...
The Space and Astronomy Agora
Yes You Can.

Forum List | Follow Ups | Post Message | Back to Thread Topics | In Response To
Posted by Rick Crockett on September 7, 2000 22:05:49 UTC

I have been making a living by building custom machines for several years now.

If you are not interested in spending $500 to $800 in time and money for a simple light weight machine for mirrors up to ten inches then you might be interested in some I will be building for various individuals.

The current interest is for 30" machines for about $3,300 to $3,500 . I have a design for a single motor variable rate stroke and RPM for up to 18" for about $1500.

Otherwise you might try LRE.COM for other commercial machines. They have some used ones half the size and for four times the cost of mine but they won`t do all mine will.

I still maintain that the machine is not the way to go for the novice and that the only reason to use the machine is for quanity or size.

Follow Ups:

    Login to Post
    Additional Information
    Google
     
    Web www.astronomy.net
    DayNightLine
    About Astronomy Net | Advertise on Astronomy Net | Contact & Comments | Privacy Policy
    Unless otherwise specified, web site content Copyright 1994-2021 John Huggins All Rights Reserved
    Forum posts are Copyright their authors as specified in the heading above the post.
    "dbHTML," "AstroGuide," "ASTRONOMY.NET" & "VA.NET"
    are trademarks of John Huggins